XLR/TRS

divine noise xlr cable

XLR///


Until now, the cable world has been entirely without a microphone cable with two - yes, we said two - 20 AWG stranded center conductor cables WITH double spiraled shielding. The advantage of having two 20 AWG conductors is that you pass more of your signal, giving you a fuller, clearer sound. The spiraled shielding (instead of braided) makes for a flatter laying and easier coiling cable. Size, maneuverability, and quality are essential parts of getting the best and most reliable signal from your instruments to its audience.

  • Our proprietary 2x 20 AWG stranded center conductor, a double spiral shield providing 98% coverage. Semi-conductive PVC covering reduces Tribo-Electric Noise and provides clean, low-noise performances, without microphonics.
  • The oxygen free copper used in our cables delivers the purest sound quality while remaining flexible and noise free.
  • Every cable is soldered with the highest quality silver solder.
  • Thick (.280"), heavy-duty PVC outer jacket.
  • We feature Neutrik XLR Male and XLR Female plugs.
  • Completely made by hand in Portland, OR USA.
  • Divine Noise offers a lifetime no hassle warranty on every cable.




divine noise trs cable




TRS ST = G&H Straight Connector
TRS RA = Switchcraft Right Angle Connector
XLR M = Neutrik XLR Male Connector
XLR F = Neutrik XLR Female Connector

TRS///


Our TRS cable is the exact same as our XLR cable - just a different application! What makes our TRS stereo cable different from all others on the market is it has two 20 AWG stranded center conductor cables WITH double spiraled shielding. The spiraled shielding (instead of braided) makes for a flatter laying and easier coiling cable. These two 20 AWG conductors give you a more of your signal. This may seem like bologna but size and maneuverability are essential parts of getting the best (and most reliable) signal from your instruments to its audience.

  • Our proprietary 2x 20 AWG stranded center conductor, a double spiral shield providing 98% coverage. Semi-conductive PVC covering reduces Tribo-Electric Noise and provides clean, low-noise performances, without microphonics.
  • The oxygen free copper used in our cables delivers the purest sound quality while remaining flexible and noise free
  • Thick (.280"), heavy-duty PVC outer jacket.
  • Every cable is soldered by hand using the highest quality silver solder.
  • We use Switchcraft TRS Right Angle and G&H TRS Straight
  • Completely made by hand in Portland, OR USA.
  • Divine Noise offers a lifetime no hassle warranty on every cable.


Sum to mono




divine noise trs cable




NEW! TRS CURLY CABLE ///


Our prized Curly cable is now available with TRS plugs. That's right, this Curly goes Stereo!

Perfect for electric guitars with stereo circuitry (like the Gibson ES-345 and ES-355 or Rickenbackers with Rick-O-Sound), acoustic guitars with an under-saddle pickup and onboard microphone setup, and electronic instruments with a balanced stereo out. It's also a great sonic fit with active high impedance pick-ups.

We are the first and only company to offer a high quality TRS Curly cable that is not only reliable enough for long tours but sounds great while recording.

  • Our proprietary 2x 20 AWG stranded center conductor, a double spiral shield providing 98% coverage. Semi-conductive PVC covering reduces Tribo-Electric Noise and provides clean, low-noise performances, without microphonics.
  • The oxygen free copper used in our cables delivers the purest sound quality while remaining flexible and noise free.
  • Every cable is soldered with the highest quality silver solder.
  • Thick (.280"), heavy-duty PVC outer jacket.
  • We use Switchcraft TRS Right Angle and G&H TRS Straight plugs
  • Completely made by hand in Portland, OR USA.
  • Divine Noise offers a lifetime no hassle warranty on every cable.
  • Cable can be summed to Mono (special request)
  • Color options: Black only


Sum to mono




divine noise trs 50-50 cable




TRS ST = G&H Straight Connector
TRS RA = Switchcraft Right Angle Connector

NEW! TRS 50/50 CABLE ///


Our prized 50/50 cable is now available with TRS plugs. That's right, this 50/50 goes Stereo!

Perfect for electric guitars with stereo circuitry (like the Gibson ES-345 and ES-355 or Rickenbackers with Rick-O-Sound), acoustic guitars with an under-saddle pickup and onboard microphone setup, and electronic instruments with a balanced stereo out. It's also a great sonic fit with active high impedance pick-ups.

The 50/50 gives you 22-feet of coiled cable and 8-feet of straight cable so you get the best of both worlds. We are the first and only company to offer a high quality TRS Curly cable that is not only reliable enough for long tours but sounds great while recording.

  • Our proprietary 2x 20 AWG stranded center conductor, a double spiral shield providing 98% coverage. Semi-conductive PVC covering reduces Tribo-Electric Noise and provides clean, low-noise performances, without microphonics.
  • The oxygen free copper used in our cables delivers the purest sound quality while remaining flexible and noise free.
  • Every cable is soldered with the highest quality silver solder.
  • Thick (.280"), heavy-duty PVC outer jacket.
  • We use Switchcraft TRS Right Angle and G&H TRS Straight plugs
  • Completely made by hand in Portland, OR USA.
  • Divine Noise offers a lifetime no hassle warranty on every cable.
  • Cable can be summed to Mono (special request)
  • Color options: Black only


Sum to mono




divine noise trs y cable




NEW! TRS STEREO Y-CABLE ///


This TRS Y-cable starts with our lean and mean patch cable design, Teenie,. The result is a thinner, more streamlined Y cable that rocks harder and winds up easier.

This 20-ft Y cable cable connects to your instrument with an unbalanced TRS plug. The last five feet break out into two unbound mono leads so you can send your Tip and Ring signal down to two different effects chains to two amps for a jaw-dropping stereo experience.

Perfect for guitars with built-in stereo circuits like Gibson ES-345 and ES-355 or Rickenbackers with Ric-O-Sound, our TRS Stereo Y-Cable helps you unlock new tonal possibilities and stand-out signature sounds on stage or in the studio.

It's also great for acoustic players with both sound hole and piezo pickups. You can send each pickup to different DI's to enable you to blend the two pickups to find your tonal bliss.

  • 2 x 20 AWG stranded center conductor, a spiral shield of bare copper providing 95% coverage. Semi-conductive PVC covering reduces Tribo-Electric Noise and provides clean, low-noise performance without microphonics.
  • Low capacitance (30 pF/FT) provides a rich, clear, warm tone - never bright, harsh or brittle.
  • The oxygen free copper used in our cables delivers the purest sound quality while remaining flexible and noise free.
  • Every cable is soldered with the highest quality silver solder.
  • Completely made by hand in Portland, OR USA.
  • Divine Noise offers a lifetime no hassle warranty on every cable.
  • Color options: Black only